Vinyl flooring SPC are extremely durable and easy to clean and maintain. However, to ensure they last for years, proper care and the use of pads, such as chair and furniture pads, are essential.
1.
Place doormats at the entrances to the apartment to effectively prevent sand, earth and water from being brought in on the shoe soles. Protect your floor by placing protective mats in front of and/or behind each entrance. Protective mats will collect dirt, sand, pebbles and other solid particles and absorb moisture. Keep protective mats clean. Do not use latex or rubber backed mats on the SPC floors as some compounds in latex and rubber can permanently stain or damage the panels. Protective mats for laying on the SPC panels should be marked as “non-staining”.
2.
All furniture and other devices that are in contact with the floor should be equipped with protective pads, e.g. felt pads, which should be replaced regularly.
3.
Place armchairs and other furniture equipped with hard plastic casters on plastic protective mats. If the protective mats are not used, replace the castors with W-type hard floor castors.
4.
The floor exposed to sunlight (UV light) will change its original colour.
5.
The floor is factory finished and ready for use immediately after installation. Floor care should only be carried out using products designed for this purpose. The SPC floor care instructions can be found at barlinek.com
Clean the floor with a mop, along the panels.
6.
The temperature in the room where the floor is installed should be between +18°C and +29°C.
7.
You can download instruction in PDF file.
autor:
