fbpx

BARLINEK ENGINEERED WOODEN FLOORING

Barlinek Flooring it’s not a one but three layer of real wood arranged in a modern cross-construction. Layered floor construction ensures the stability of the floor and allows to restrain the forces of nature.  Its construction is ideal for underfloor heating.

Advantages of the Barlinek floor

  • 100% wood
  • Possible to lay over underfloor heating
  • Solid construction
  • Fast and easy DIY installation
  • A product ready for use immediately after installation
  • Possible to renovate

naglowekmain2

100% OF WOOD

The Barlinek wood floors is a natural and noble product created from genuine wood. Wooden floors are healthier and more durable than any kind of synthetic imitation. Unlike laminates, they are pleasantly warm to the touch, they do not electrify nor attract dust or mites. Therefore, they are a perfect solution for allergy sufferers. They provide perfect soundproofing, and thanks to their ability to absorb humidity they regulate microclimate of the room. Also, the Barlinek wooden floors can be sanded down and renovated with lacquer many times.

FOR UNDER FLOOR HEATING

Not every wood floor can be laid over underfloor heating. However, thanks to its layered cross structure, the Barlinek wood flooring conducts heat well and can be successfully applied on both electric and water floor heating. It is one of its advantages over solid wood floors. The Barlinek wood flooring can be installed over floor heating in two ways. It can be laid in a floating system or by gluing to the subfloor.

STABLE CONSTRUCTION

Our climate is a real challenge for the floor. Natural wood’s moisture content will fluctuate depending on the weather outside. For this reason, it sometimes occurs that traditional wood floors swell, squeak or dry out causing splits. But not the Barlinek wooden floors! It is made not from one, but three layers of real wood arranged in a cross structure. The cross construction reduces natural tension and compression of wood, provides a balance between the layers of the board, and thus guarantees the stability of the floor, even under changing weather conditions outside.
The Barlinek wood floors is not one, but three layers of real wood arranged in a modern cross construction. The Barlinek wood floors layered structure ensures the floor’s stability and enables the forces of nature to be tamed as effectively as possible. It is perfectly suited for underfloor heating.

SURFACE LAYER – selected European or exotic wood, oiled or lacquered.

MIDDLE AND BOTTOM LAYER – structure made of coniferous wood.

QUICK INSTALLATION

The Barlinek wood floors can be installed in a floating system, that is glueless and based on modern tongue-and-groove joints. It is a quick and simple method, that allows you to install the floor yourself, without having to employ an expert. The floor is also easy to be dismantled or re-installed. An alternative is to install the floor in a traditional way – by gluing the boards to the subfloor, which ensures stability of the installation even on large surfaces. The Barlinek engineered wood flooring does not require any additional preservative treatment due to its highest quality factory-finishing with oils or lacquers. The floor is ready for use immediately after installation.

MODERN JOINTS

Lay the floor yourself and enjoy it the very same day. Two quick 5Gc joints and Barclick allow you to lay the floor without most of the tools which are usually necessary to install a floor.
Crosslock is the latest joint designed by Barlinek, which facilitates the arranging of the Classic Fir Floor Pattern in a clean, quick and easy manner.

JOINT – 5GC BARLOCK SYSTEM:

  • fast – assembly is 25% faster
  • by yourself – no need to be a specialist
  • clean and comfortable – reduction of contamination risk during installation
  • safe – reduction of damage risk during installation or dismantling

JOINT – BARCLICK SYSTEM

  • quick and easy installation
  • the floor is immediately ready to use
  • strong and lasting joints
  • easy dismantling
  • can be laid again.

JOINT – CROSSLOCK: 

  • a clean, quick, and easy assembly without using specialist tools
  • an arrangement system which does not require using both right and left woodblocks
  • no risk of damaging the joint during assembly.

STRIPS

Barlinek floor depending of the number of strips.

6-STRIP

6-strip boards of 180mm width and 2200mm height. Boards of this size are included into our DECOR line.

3-STRIP

3-strip of staves across the width of the board (similar appearance to a traditional floor).

1-STRIP

1-strip of staves along the width of the board (similar appearance to solid wooden floors)

INTENSITY OF THE WOOD FEATURES OF BARLINEK FLOOR

A wooden floor is a natural product so each board has an unique appearance.

A VERY LARGE QUANTITY

  • varied colour pattern,
  • small, medium and big size sound knots,
  • small, medium and big size knots, filled cracks,
  • sapwood,
  • silver grain,
  • distinct wood figure.

LARGE QUANTITY

  • varied colour pattern,
  • small, medium and big size sound knots,
  • small, medium and big size knots, filled cracks,
  • sapwood,
  • silver grain.

MODERATE QUANTITY

  • varied colour pattern,
  • small and medium size sound knots,
  • small and medium size knots, filled cracks,
  • edge sapwood,
  • silver grain.

VERY SMALL QUANTITY

  • varied colour pattern,
  • small and medium size sound knots,
  • small size filled cracks,
  • edge sapwood,
  • silver grain

DIMENSIONS

BIG SIZE 207

1-strip boards of 207mm width and 2200mm height. Boards of this size are included into our SENSES collection.

GRANDE 180

1-strip boards of 180mm width and 2200mm height. Boards of this size are included into our PURE line.

MEDIO 155

1-strip boards of 155mm width and 2200mm height. Boards of this size are included into our PURE line.

PICCOLO 130

1-strip boards of 130mm width come in heights: 2200mm, 1092 mm. Boards of this size are included into our PURE line.

HERRINGBONE 130

1-strip boards of 130mm width and height 725 mm. Boards of this size are included into our PURE Classico line.

MOLTI 207

3-strip boards of 207mm width and 2200mm height. Boards of this size are included into our DECOR and LIFE lines.

MULTIPLO 180

6-strip boards of 180mm width and 2200mm height. Boards of this size are included into our DECOR line.

BIG SIZE 207

1-strip boards of 207mm width and 2200mm height. Boards of this size are included into our SENSES collection.

GRANDE 180

1-strip boards of 180mm width and 2200mm height. Boards of this size are included into our PURE line.

MEDIO 155

1-strip boards of 155mm width and 2200mm height. Boards of this size are included into our PURE line.

PICCOLO 130

1-strip boards of 130mm width come in heights: 2200mm, 1092 mm. Boards of this size are included into our PURE line.

HERRINGBONE 130

1-strip boards of 130mm width and height 725 mm. Boards of this size are included into our PURE Classico line.

MOLTI 207

3-strip boards of 207mm width and 2200mm height. Boards of this size are included into our DECOR and LIFE lines.

MULTIPLO 180

6-strip boards of 180mm width and 2200mm height. Boards of this size are included into our DECOR line.

BARLINEK FLOORBOARD AFTER DISASSEMBLY

Worn, disassembled Barlinek floorboards should be taken to a selective waste collection point. The same applies to the unused floorboards’ waste during installation.