Panele winylowe SPC care (collection: Living)

Panele winylowe are extremely durable and easy to clean and maintain. But to ensure they last for years, it’s important to care for them properly and use items such as chair glides or furniture pads.

contents

Care and Use of SPC Panels (Aura Collection)

1. Place doormats at apartment entrances to effectively prevent sand, dirt, and water from being tracked in on footwear. Protect the floor by using mats outside and/or inside all entrances. Mats will collect tracked-in dirt, sand, pebbles, and other solid particles, and will absorb moisture. Keep mats clean. Do not use mats with latex or rubber backing on SPC flooring, as some compounds in these materials can permanently stain or damage the panel. Mats for SPC panels should be labeled as “non-staining.”
2. All furniture and other equipment that comes into contact with the floor should be equipped with protective pads, e.g., felt pads, which should be replaced regularly.
3. Chairs and other furniture equipped with hard plastic wheels should be used on plastic protective mats. If protective mats are not used, the wheels should be replaced with those designed for hard floors (type W).

4.

If the floor is exposed to sunlight (UV light), it will change its original color.

5.

The floor is factory-finished and ready for use immediately after installation. Floor care should only be carried out using products intended for this purpose. SPC floor care instructions can be found at barlinek.com
•Never use vacuum cleaners with a brush that could damage the floor.
•Immediately remove any water spills.
•Vacuum or sweep the floor to remove any particles that could scratch it.
•A damp cloth with or without a recommended floor care product can be used. Do not leave wet marks on the floor after cleaning.
•Do not use high-pressure washers or steam cleaners to clean the floor.
•Trim pets’ claws to prevent floor damage.
•Do not move heavy furniture or equipment across the floor.
•Using floor care products other than those recommended by Barlinek may cause damage to the lacquer layer, changes in color and gloss, and the formation of stains.
•Do not use wax, paraffin, or silicone-based products.
•For daily care, we recommend dry cleaning (vacuuming, sweeping).
•Clean the floor with

6.

While the floor is in use, the room temperature should be between +18°C and +29°C.

autor:

Picture of Paweł Gawior
Paweł Gawior

Share:

Technical documents

terms of use, warranty cards, protocols, declarations

Search

Search